plc automation

Hotline

Honeywell SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm) Consumables

description:ACCESSORIES, CONSUMABLES & SPARES...
BASIC INFO
Honeywell SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm) Consumables
 
Sensepoint XCD
 
The Sensepoint XCD (exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. This advanced and versatile range of gas detectors monitors and indicates the presence of any one of a selection of toxic and flammable gases. Any user can instantly identify the operating status of XCD via its clear multi-function backlit display. Output signals available are industrial standard 4 to 20mA, three relay contacts and MODBUS digital. A magnetic wand allows non intrusive one person calibration, while a wide choice of accesories means XCD can be used in many applications.
 
Sensepoint XCD with Flammable and Primary Toxic Sensor Cartridge
 
A Sensepoint XCD KIT consists of Transmitter, Sensor socket, Sensor cartridge, Standard weather protection, Magnetic wand and Allen key.
 
Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)
Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. 
KIT includes Transmitter, Magnetic Wand and Allen Key
 
Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)
Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors
such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored
from a convenient location.
KIT includes Transmitter, Magnetic Wand and Allen Key

Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)
Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. KIT includes Transmitter, Magnetic Wand and Allen Key
INSTRUMENT
Without Modbus
SPXCDALMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted LM25
SPXCDASMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS
SPXCDULNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS
With Modbus
SPXCDALMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted LM25
SPXCDASMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted 316SS
SPXCDULNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS
Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA input XCD-RTD transmitter.
 
Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)
Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored from a convenient location. KIT includes Transmitter, Magnetic Wand and Allen Key
INSTRUMENT
Without Modbus
SPXCDALMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25
SPXCDASMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS
SPXCDULNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS
With Modbus
SPXCDALMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25
SPXCDASMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS
SPXCDULNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS
Remote Flammable Sensor (XCD Sensor Cartridge + Socket Housing)
SPXCDXSRFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRRXSS Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRPXSS Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRB1SS Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing
SPXCDXSRB2SS Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing
00780-A-0100 Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified)
Sensepoint XCD
ACCESSORIES, CONSUMABLES & SPARES
ACCESSORIES
S3KCAL Calibration cap
SPXCDCC Collecting cone for use with lighter than air gases
SPXCDDMK Duct mounting kit
SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets)
SPXCDSDP Sunshade / Deluge Protection
SPXCDFH Flow Housing for Sample Panel
Consumables
SPXCDXSFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL)
SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL)
SPXCDXSPXSS C3H8 (Propane) IR 0-100%LEL (20,0 to 100.0%LEL)
SPXCDXSO1SS Oxygen 25.0%/Vol only
SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm)
SPXCDXSCXSS Carbon Monoxide 0-300ppm (100 to 1000ppm)
SPXCDXSG1SS Hydrogen 0-1000ppm only
SPXCDXSNXSS Nitrogen Dioxide 10-50ppm (10.0 to 50.0ppm)
SPXCDXSB1SS Carbon Dioxide IR 0-2%VOL only
SPXCDXSB2SS Carbon Dioxide IR 0-5%VOL only
Spares (Miscellaneous)
SPXCDWP Sensepoint XCD Standard Weather Protection
SPXCDSRLS Sensor Retainer with locking screw
SPXCDAKS Allen key for stopper
SPXCDHWES Hex wrench for earth screw
SPXCDEBS Earth Bracket and Screws
SPXCDMAG Magnetic wand
SPXCDRSSH Sensor Socket Housing for XCD
SPXCDMBUS Replacement Modbus Module
SPXCDSERVK Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3
pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge
retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and
sensor retainer (2 pieces)
SPXCDTOOLK XCD Service Tool Kit, Including Magnet, Hex wrench for earth screw and Allen key for locking screws
SPXCDTMK XCD Terminals Kit, Including Terminal block for relays (green) and Terminal block power
SPXCDNPTP 3/4"NPT plug (Certified as part of Ex d enclosure)
SPXCDM20P M20 plug (Certified as part of Ex d enclosure)
Spares (Replacement Display Module)
Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires confiiguration after fitting via the menu.
SPXCDDMT Replacement display module for O2 & Toxic
SPXCDDMF Replacement display module for FL & IR
SPXCDDM4 Replacement display module for RTD (4~20mA)
SPXCDDMR Replacement display module for RFD
SPXCDDMT12 Replacement O2 & Toxic display module Without Modbus for 12-32 Vdc
SPXCDDMF12 Replacement FL & IR display module Without Modbus for 12-32 Vdc
SPXCDDMTM12 Replacement O2 & Toxic display module with Modbus for 12-32 Vdc
SPXCDDMFM12 Replacement FL & IR display module with Modbus for 12-32 Vdc
SPXCDDMTM Replacement display module for O2 & Toxic with Modbus
SPXCDDMFM Replacement display module for FL & IR with Modbus
SPXCDDM4M Replacement display module for RTD with Modbus
SPXCDDMRM Replacement display module for RFD with Modbus
Spares (Replacement Terminal Module)
Each replacement terminal module includes pre-configured PCB (for sensor and range), terminals, screws, 'U' clamp, plastic cover and fixing screws.
SPXCDTMO Replacement terminal module for O2
SPXCDTMT Replacement terminal module for Toxic
SPXCDTMF Replacement terminal module for FL & IR
SPXCDTMO12 Replacement O2 terminal module for 12-32 Vdc
SPXCDTMT12 Replacement Toxic terminal module for 12-32 Vdc
SPXCDTMF12 Replacement FL & IR terminal module for 12-32 Vdc
SPXCDTM4 Replacement terminal module for RTD (4~20mA)
SPXCDTMR Replacement terminal module for RFD
Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS )
SPXCDALMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry
SPXCDALMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry
SPXCDALMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry
SPXCDASMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry
SPXCDASMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry
SPXCDASMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry
Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only with MODBUS )
SPXCDALMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry
SPXCDALMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry
SPXCDALMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry
SPXCDASMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry
SPXCDASMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry
SPXCDASMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry
Spares (UL APPROVAL Replacement XCD STD version Transmitter only without MODBUS )
SPXCDULNTXO UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry
SPXCDULNTXT UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry
SPXCDULNTXF UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry
SPXCDUSNTXO UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry
SPXCDUSNTXT UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry
SPXCDUSNTXF UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry
Spares (UL APPROVAL Replacement XCD STD version Transmitter only with MODBUS )
SPXCDULNTXOM UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry
SPXCDULNTXTM UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry
SPXCDULNTXFM UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry
SPXCDUSNTXOM UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry
SPXCDUSNTXTM UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry
SPXCDUSNTXFM UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry
 
Special Flammable Gas Calibrations
SPXCDSFGC1 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC2 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC3 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC4 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC5 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC6-H Special Flammable Gas Calibration, 0-100%LEL,6* - Hydrogen
SPXCDSFGC7 Special Flammable Gas Calibration, 0-100%LEL
SPXCDSFGC8 Special Flammable Gas Calibration, 0-100%LEL
Note: If no Special Flammable Gas Calibration part no. is included on PO, a Methane (6* calibration will be supplied)

Pre:Honeywell SPXCDXSO1SS Oxygen 25.0%/Vol only Next:Honeywell SPXCDXSCXSS Carbon Monoxide 0-300ppm (100 to 1000ppm)